DIY Ping Pong Table

Exciting DIY Ping Pong Table Inspiration

If you’re intending to play a great deal of ping-pong, as well as if you have a huge sufficient room in your house, why not develop a ping-pong table? With the best product, devices, as well as guidelines, you could develop among these tables on your own, your close friends, and also your household.

Action 1– Structure Your Table to Policy Dimension

Stylish DIY Ping Pong Table Designs

You’ll desire your table to be guideline dimension, which is 9 feet long and also 5 feet vast, 30 inches high. Make the table peak of plywood.
Action 2– Structure Your Table Framework

To earn your table base, cut 2 items of 2 x 2 lumber, each 9 feet long. Cut 2 even more items, each 4′ 8″ long. Lay these items on a level surface area with the lengthy items parallel with each various other as well as almost 5 feet apart. After that, lay one brief item in between the lengthy items on top end, and also the various other brief item in between the lengthy items near the bottom end. This must create a triangular 9 feet long and also 5 feet vast. Pierce an overview opening with the lower and also leading ends of the lengthy items and also right into completions of the brief items. Affix each edge with screws owned right into the sides of the lengthy items and also right into completions of the brief items.
Action 3– Structure Your Table Top

Action and also reduce your plywood sheets to ensure that you have 2 items, each 4′ broad, 5′ long. Cut 2 even more items, the very first item, 5′ lengthy as well as 2′ large, the 2nd item, 5′ lengthy and also 1′ vast. Location both huge items side-by-side, with a 1′ void in between them, position the narrower of both little items in between both huge items. When attached with each other, these 3 items need to make 1 item, 5′ large, 9′ long. Make use of the bigger of both slim items as a plate that extends the center of the table top where the 3 items are collaborated. After that, make use of timber screws to attach home plate to the 3 leading items. This will certainly make one strong table top, 5′ large as well as 9′ long. Counter sink the screws and also fill out the openings with timber filler.

Mesmerizing DIY Ping Pong Table Concepts

Tip 4– Affix Structure to Table Top

Usage timber adhesive, timber screws, as well as clamps to connect the structure down surface area of the table top.
Tip 5– Cut as well as Connect the Table Legs

Step as well as reduce 4 legs from the 2 x 2’s, each 29 1/2 inches long. Usage screws to connect each leg at an edge of the table, at the within side of the framework.
Action 6– Complete

Loaded with timber putty the splits in the table top made by linking the 3 items of plywood. When the filler is completely dry, sand the joints. Repaint the table with tool eco-friendly paint. When the paint is completely dry, utilize covering up tape as well as white paint to earn a slim boundary.

14 Photos of the DIY Ping Pong Table

Incredible DIY Ping Pong Table IdeasExtraordinary DIY Ping Pong Table DesignsExciting DIY Ping Pong Table InspirationCharming DIY Ping Pong Table DesignsWonderful DIY Ping Pong Table DesignUnique DIY Ping Pong Table InspirationsUnique DIY Ping Pong Table IdeaStylish DIY Ping Pong Table DesignsStunning DIY Ping Pong Table ConceptSimple DIY Ping Pong Table ConceptRemarkable DIY Ping Pong Table DesignsPopular DIY Ping Pong Table InspirationMesmerizing DIY Ping Pong Table ConceptsMarvellous DIY Ping Pong Table Designs